Leather Footwear DUO-Pack

$16.95

The complete care system for thoroughly cleaning, revitalizing breathability and adding water repellency to all full grain leather footwear. Easy to apply and PFC free.

For cleaning and waterproofing leather footwear
  • Revives the performance of your footwear, keeping your feet warmer and drier
  • Footwear Cleaning Gel cleans effectively, restores water repellency and revives breathability
  • Waterproofing Wax for Leather adds water repellency and revives breathability without softening leather
  • Recommended for Gore-Tex®, eVent® and all other waterproof footwear
Suitable for
How to use:

All you need to clean, revitalize breathability and add water repellency to all full grain leather footwear.

Both easy to apply by hand; spray or sponge on. Nikwax products are all environmentally friendly; they are water-based, PFC-free and have never used any harmful aerosols.

Why breathability depends upon water repellency…

Breathable waterproof footwear is most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer leather absorbs water, the breathability of the footwear will be reduced. Therefore, the Durable Water Repellency (DWR) of your footwear must be maintained to ensure comfort. Through use, the outer surface of footwear will pick up contaminants, such as dirt, which attract water, masking the effect of any DWR coating.

Nikwax Footwear Cleaning Gel will remove contaminants and revitalize DWR. Durable Water Repellency will eventually wear off and need to be renewed with Nikwax Waterproofing Wax for Leather.

Breathable waterproof footwear is for active, outdoor people…

Anyone who is active outside in damp or wet conditions will benefit from breathable waterproof footwear. Whether you’re a mountaineer, cyclist, dog walker, or you work outside, you will need good footwear.

Breathable footwear needs the right cleaner and waterproofer to maintain performance…

How Nikwax Footwear Cleaning Gel and Nikwax Waterproofing Wax for Leather maintain and protect your waterproof footwear…

Sponge On Icon
Apply Nikwax Footwear Cleaning Gel by hand…

 

Recommended for Gore-Tex®, & eVENT® footwear.

  1. Rinse item with clean water to remove loose mud and to dampen surface.
  2. Shake well before use. Press sponge applicator to break seal.
  3. Apply generously over the area to be cleaned.
  4. If very dirty scrub with a stiff nylon brush (e.g. nail brush).
  5. Rinse well with clean water.
  6. If required, apply appropriate Nikwax waterproofing while footwear is damp.

Note: Color may run, test on a hidden area first.

Sponge On Applicator Icon
Apply Nikwax Waterproofing Wax for Leather by hand…

 

  1. Brush off dirt with a damp cloth and clean using Nikwax Footwear Cleaning Gel™.
  2. Protect work area. Shake well before use.
  3. Press sponge applicator to break seal. Apply to wet leather.
  4. After 2-3 minutes, remove surplus with a cloth.
  5. Buff with a damp cloth to shine.

Note: Test on a hidden area first. Nikwax Waterproofing Wax for Leather will convert nubuck to a smooth waxy finish.